Problem to display Discovered Hosts

[dinoex]

Important notices

Before you add a new report, we ask you kindly to acknowledge the following:

• [x ] I have read the contributing guide lines at https://github.com/opnsense/core/blob/master/CONTRIBUTING.md
• [ x] I am convinced that my issue is new after having checked both open and closed issues at https://github.com/opnsense/core/issues?q=is%3Aissue

Describe the bug

hostwatch running.

When navigating to "Discovered Hosts" the first 50 entries are displayed, good.

Then I alter the number of entries in the view, e.G. switch to 100 entries.

Problem to display Discovered Hosts
A clear and concise description of what the bug is, including last known working version (if any).

Tip: to validate your setup was working with the previous version, use opnsense-revert (https://docs.opnsense.org/manual/opnsense_tools.html#opnsense-revert)

To Reproduce

Steps to reproduce the behavior:

1. Go to 'Interfaces -> Neighbors -> Automatic Discovery '
2. Click on 'Discovered Hosts'
3. Click on "50" and change it to "100"
4. See error message Host discovery service is disabled, below the hosts currently known by this firewall via ARP and NDP
5. Go to 'System -> Diagnostics -> Services', the service is still running.
6. Go to 'Interfaces -> Neighbors -> Automatic Discovery ', the icon is still green
7. Click on 'Discovered Hosts'
8. Click on "100" and change it to "50", then the table is displayed again.

Expected behavior

See the first 100 entries.

Describe alternatives you considered

I tried out all options, only "50" entries works.

I found no related line in the logfiles.

No change after Reboot.

Environment

Software version used and hardware type if relevant, e.g.:

OPNsense 23.7.8 (amd64).
Intel® Xeon™ E3-1225V5 3.3Ghz Quad Core
Network Intel® I210-AT

[fichtner]

Hi @dinoex,

Haven't had an issue testing but might be related to database being busy. Best next stable version to recheck would be 26.1 which should be out at the end of next week.

Thanks,
Franco